PPP user who will be connected from remote client machine has been created. To show secrets from cmd: > ppp secret> print.Alternatively, you can do this cmd: > ppp secret> add name=username service=pptp password=123 local-address=192.168.20.1 remote-address=192.168.20.50.A PPTP user that means VPN user will be created now. Choose Service=pptp, Profile=default, Local Address= 192.168.20.1 (Router interface IP), Remote Address= 192.168.20.50 (Local IP address that will be assigned to the remote client). Now put username and password in Name and Password input field.Go to PPP > Secrets and click on PLUS SIGN (+).To create username and password, follow the below steps carefully. Now it is time to create a user who will be connected to pptp server. Step 2: Creating PPP Secrets(username and password) And to show pptp-server status: > interface pptp-server server> print.Alternatively, you can do this cmd: > interface pptp-server server> set enabled=yes.Now click on enabled checkbox and then click Apply and OK button.Go to PPP menu item and click on PPTP Server button from PPP window.The following step will show how to enable PPTP server in your MikroTik Router. The first step to create PPTP Tunnel in MikroTik Router is to enable PPTP server. Step 1: Enabling PPTP Server in MikroTik Router Creating PPP Secrets (Username and Password).Complete PPTP server configuration in MikroTik router can be divided into four steps. Part 2: PPTP Server Configuration in MikroTik RouterĪfter completing MikroTik router basic configuration, you need to configure PPTP server in MikroTik Router. Now it is time to enable PPTP server in our MikroTik Router. In New Route window, click on Gateway input field and put WAN Gateway address (172.22.15.1) in Gateway input field and click on Apply and OK button.īasic RouterOS configuration has been completed. Go to IP > Routes and click on PLUS SIGN (+).Under General tab, choose srcnat from Chain dropdown menu and click on Action tab and then choose masquerade from Action dropdown menu. Go to IP > Firewall and click on NAT tab and then click on PLUS SIGN (+).Go to IP > DNS and put DNS servers IP (8.8.8.8 or 8.8.4.4) in Servers input field and click on Apply and OK button.Click on PLUS SIGN again and put LAN IP (192.168.20.1/24) in Address input field and choose LAN interface (ether2) from Interface dropdown menu and click on Apply and OK button. In New Address window, put WAN IP address (172.22.15.221/24) in Address input field and choose WAN interface (ether1) from Interface dropdown menu and click on Apply and OK button. In Address List window, click on PLUS SIGN (+). Login to MikroTik RouterOS using winbox and go to IP > Addresses.The following steps will show how to do these topics in your RouterOS. Basic RouterOS configuration includes assigning WAN IP, LAN gateway IP, DNS IP, NAT configuration and default route configuration. In the first part, we will complete MikroTik Router basic configuration. Part 1: MikroTik Router Basic Configuration Part 1: MikroTik router basic configuration.VPN configuration in MikroTik router with PPTP service can be divided into two parts. Remote Address: 192.168.20.50 (IP address that will be assigned to remote client).Local Address for remote client: 192.168.20.1 (MikroTik LAN Interface IP).MikroTik WAN IP: 172.22.15.221/24 (Must replace with your Public IP provided by your ISP).To configure a MikroTik PPTP service that will connect a remote workstation across public network, I am establishing a network like below diagram. In this article, I will show how to configure MikroTik PPTP service that will be able to connect a remote workstation (any Operating System including Windows) across public network and the remote workstation will be able to get access to local network as if the workstation was directly connected to the local network.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |